1
S. Kasmaiee, M. Tadjfar, S. Kasmaiee,
"Backward injection of liquid jets in crossflow",
Physics of Fluids,
vol. 37,
no. 43310,
pp.1-33,
2025.
2
S. Kasmaiee, M. Tadjfar, S. Kasmaiee,
"Pressure swirl nozzles with different discharge orifice shapes injecting into transverse airflow",
Physics of Fluids,
vol. 37,
no. 1,
pp.1-26,
2024.
3
A. Hatami, M. Tadjfar,
"Experimental study on the change of the orientation of high aspect ratio nozzle slit relative to the airflow",
Scientific Reports,
vol. 14,
no. 1,
pp.1-23,
2024.
4
N.S. Hosseini, M. Tadjfar, Mohammad Saeedi, Antonnela Abba,
"Large-eddy simulation of vortex interaction in pitching-fixed tandem airfoils",
Physics of Fluids,
vol. 36,
no. 8,
pp.1-18,
2024.
5
S. Kasmaiee, M. Tadjfar,
"Elliptical pressure swirl jet issuing into stagnant air",
Physics of Fluids,
vol. 36,
no. 7,
pp.1-21,
2024.
6
M. Tadjfar, D. Kamari, Ali Tarokh,
"Use of machine learning to optimize actuator configuration on an airfoil",
Journal of Fluids and Structures,
vol. 128,
no. 104141,
pp.1-24,
2024.
7
S. Kasmaiee, M. Tadjfar,
"Non-circular pressure swirl nozzles injecting into stagnant air",
International Journal of Multiphase Flow,
vol. 175,
no. 104798,
pp.1-25,
2024.
8
S. Kasmaiee, M. Tadjfar, S. Kasmaiee, Goodarz Ahmadi,
"Linear stability analysis of surface waves of liquid jet injected in transverse gas flow with different angles",
Theoretical and Computational Fluid Dynamics,
vol. 37,
no. 6,
pp.1-32,
2024.
9
S. Kasmaiee, M. Tadjfar, S. Kasmaiee,
"Machine learning-based optimization of a pitching airfoil performance in dynamic stall conditions using a suction controller",
Physics of Fluids,
vol. 35,
no. 9,
pp.1-22,
2023.
10
S. Kasmaiee, M. Tadjfar, S. Kasmaiee,
"Optimization of Blowing Jet Performance on Wind Turbine Airfoil Under Dynamic Stall Conditions Using Active Machine Learning and Computational Intelligence",
..Arabian Journal For Science and Engineering,
vol. 1,
no. 1,
pp.1-25,
2023.
11
S. Kasmaiee, M. Tadjfar,
":Experimental study of the injection angle impact on the column Waves Wavelength, frequency and drop size",
Experimental Thermal and Fluid Science,
vol. 148,
no. 1,
pp.1-19,
2023.
12
N.S. Hosseini, M. Tadjfar, Antonnela Abba,
"Flow control with synthetic jets on two tandem airfoils using machine learning",
Physics of Fluids,
vol. 35,
no. 2,
pp.1-18,
2023.
13
S. Kasmaiee, M. Tadjfar, S. Kasmaiee,
"Investigation of the impact of blowing jet on the dynamic stall of NACA0012",
,
vol. 34,
no. 1,
pp.1-20,
2022.
14
S. Kasmaiee, M. Tadjfar,
"Influence of injection angle on liquid jet in crossflow",
International Journal of Multiphase Flow,
vol. 153,
no. 104128,
pp.1-19,
2022.
15
E. Asgari, M. Tadjfar,
"Role of phase-difference between two adjacent rectangular synthetic jet actuators in active control of flow over a rounded ramp",
Physics of Fluids,
vol. 34,
no. 25101,
pp.1-20,
2022.
16
M. Tadjfar, A. Jaberi, S. Najafi, A. Hatami, M.H. Aliyoldashi, Y. Rezaei, M. Mokhtari, K. Asadollahbeiki, M. Ebrahimi, B. Khazaei,
"Experimental Visualization of Liquid-Gas Interactions",
Journal of Fluids Engineering-Transactions of The Asme,
vol. 144,
no. 4,
pp.1-2,
2022.
17
N.S. Hosseini, M. Tadjfar, Antonnela Abba,
"Configuration optimization of two tandem airfoils at low Reynolds numbers",
Applied Mathematical Modelling,
vol. 102,
no. 1,
pp.828-846,
2021.
18
S. Kasmaiee, M. Tadjfar, S. Kasmaiee,
"Investigation of Suction Jet Parameters in Flow Control of Dynamic Stall",
,
vol. 32,
no. 2,
pp.181-200,
2021.
19
A. Jaberi, M. Tadjfar,
"Two-dimensional liquid sheet in transverse subsonic airflow",
Experimental Thermal and Fluid Science,
vol. 123,
no. 110326,
pp.1-21,
2021.
20
D. Kamari, M. Tadjfar,
"Implementation of Continuous Blowing and Synthetic Jet Actuators to Control the Flow Separation over a Fully Stalled Airfoil",
Amirkabir Journal of Mechanical Engineering,
vol. 0,
no. 0,
,
2021.
21
A. Jaberi, M. Tadjfar,
"Investigation on Base Flow of Two-Dimensional Liquid Jets Injected into Stagnant Air",
Amirkabir Journal of Mechanical Engineering,
vol. 53,
no. 11,
pp.51-60,
2021.
22
M.H. Aliyoldashi, M. Tadjfar, A. Jaberi,
"Entrance length effects on the flow features of rectangular liquid jets",
Proceedings of The Institution of Mechanical Engineers Part G-Journal of Aerospace Engineering,
vol. 115,
no. 3,
pp.144-157,
2020.
23
A. Jaberi, M. Tadjfar,
"Visualization of two-dimensional liquid sheets issued into subsonic gaseous crossflow",
Journal of Visualization,
vol. 23,
no. 4,
pp.1-20,
2020.
24
A. Jaberi, M. Tadjfar,
"Comparative study on interfacial oscillations of rectangular and elliptical liquid jets",
Proceedings of The Institution of Mechanical Engineers Part G-Journal of Aerospace Engineering,
vol. 235,
no. 2,
pp.1-15,
2020.
25
M. Tadjfar, D. Kamari,
"Optimization of Flow Control Parameters Over SD7003 Airfoil With Synthetic Jet Actuator",
Journal of Fluids Engineering-Transactions of The Asme,
vol. 142,
no. 2,
pp.1-15,
2019.
26
A. Jaberi, M. Tadjfar,
"Wavelength and frequency of axis-switching phenomenon formed over rectangular and elliptical liquid jets",
International Journal of Multiphase Flow,
vol. 119,
no. 1,
pp.144-154,
2019.
27
E. Asgari, M. Tadjfar,
"Active control of flow over a rounded ramp by means of single and double adjacent rectangular synthetic jet actuators",
Computers and Fluids,
vol. 190,
no. 0,
pp.98-113,
2019.
28
M. Tadjfar, A. Jaberi,
"Effects of aspect ratio on the flow development of rectangular liquid jets issued into stagnant air",
International Journal of Multiphase Flow,
vol. 115,
no. 1,
pp.144-157,
2019.
29
A. Jaberi, M. Tadjfar, A. Sheidani,
"Experimental Comparison of Breakup and Flow Characteristics of Rectangular and Elliptical Water Jets",
Amirkabir Journal of Mechanical Engineering,
vol. 50,
no. 4,
pp.1-25,
2018.
30
Y. Rezaei, M. Tadjfar,
"Experimental Comparison of Injection Characteristics of Elliptical and Circular Liquid Jets into an Air Crossflow",
Amirkabir Journal of Mechanical Engineering,
vol. 40,
no. 5,
pp.1-22,
2018.
31
M. Tadjfar, E. Asgari,
"The Role of Frequency and Phase Difference Between the Flow and the Actuation Signal of a Tangential Synthetic Jet on Dynamic Stall Flow Control",
Journal of Fluids Engineering-Transactions of The Asme,
vol. 140,
no. 11,
pp.1-13,
2018.
32
A. Jaberi, M. Tadjfar, A. Sheidani,
"Experimental Investigation of Breakup Characteristics of Elliptical, Rectangular and Circular Water Jets",
,
vol. 30,
no. 1,
pp.1-8,
2018.
33
M. Tadjfar, D. Kamari, A. Madadi,
"Optimization of SD7003 airfoil performance using TBL and CBL at low Reynolds numbers",
Aerospace Science and Technology,
vol. 79,
no. 0,
pp.199-211,
2018.
34
M. Tadjfar, E. Asgari,
"Active Flow Control of Dynamic Stall By Means of Continuous Jet Flow at Reynolds Number of 1×10~6",
Journal of Fluids Engineering-Transactions of The Asme,
vol. 139,
no. 12,
pp.1-22,
2017.
35
E. Asgari, M. Tadjfar,
"Assessment of four inflow conditions on large-eddy simulation of a gently curved backward-facing step",
Journal of Turbulence,
vol. 18,
no. 1,
pp.61-86,
2016.
36
A. Haghiri, N. Fallahpour, M. Mani, M. Tadjfar,
"Experimental study of boundary layer in compressible flow using hot film sensors through statistical and qualitative methods",
Journal of Mechanical Science and Technology,
vol. 29,
no. 11,
pp.4671-4679,
2015.
37
M. Bayati, M. Tadjfar,
"High Helmholtz Sound Prediction Generated by Confined Flows and Propagation within Ducts",
International Journal of Acoustics and Vibration,
vol. 20,
no. 1,
pp.47-55,
2015.
38
H. Esmaeili Monir, M. Tadjfar, A. Bakhtian,
"Tangential synthetic jets for separation control",
Journal of Fluids and Structures,
vol. 45,
no. 45,
pp.50-65,
2013.
39
E. Eslami, M. Tadjfar, S. Najafi,
"Aerodynamic performance of Parastoo UAV",
Aircraft Engineering and Aerospace Technology,
vol. 85,
no. 2,
pp.97-103,
2013.
40
F. Ajalli, M. Mani, M. Tadjfar,
"Plunging Wake Analysis of an Airfoil Equipped With a Gurney Flap",
Experimental Techniques,
vol. 36,
no. 6,
pp.1-13,
2012.
41
H. Esmaeili Monir, M. Tadjfar,
"Study of Wing Shapes Influence on MAV Aerodynamic Coefficients",
,
vol. سال 23 شما,
no. 6,
pp.29-46,
2012.
42
M. Tadjfar, A. Ahmadzadegan, M. Bayati,
"use of stochastic turbulence model in jet acoustics",
Amirkabir International Journal of Modeling, Identification,Simulation & Control,
vol. 43,
no. 2,
pp.19-27,
2011.
43
A. Ahmad Zadeh, M. Tadjfar,
"Aerodynamic Noicse Prediction Using Stochastic Turbulence Modeling",
American Journal of Applied Sciences,
vol. ,
no. 5,
,
2008.
44
M. Tadjfar,
"Flow Into An Arterial Branch Model",
Journal of Engineering Mathematics,
vol. ,
no. 54,
,
2006.
45
M. Tadjfar,
"Direct simulations and modelling of basic three-dimensional bifurcating tube flows",
Journal of Fluid Mechanics,
vol. ,
no. 519,
,
2004.